Hose Solutions Inc - Scottsdale, Arizona

Mike F.

I can absolutely recommend this product. I did a boat load of research. I stumbled upon this product by accident. I was looking for PVC drop pipe as that is what I saw used. I did not want to wait for delivery, etc. I found a local dealer here in Spokane, WA. I spoke to the dealer. He spoke highly of the product and that sealed the deal for me. I purchased everything I needed with the help of the local dealer. I wish I could say my installation went as easy as everyone says or the videos show. However, my installation did not. The first issue was my fault. I forgot to trim the "spider" down from 6 inches to 4 inches. Got my pump down to 260 feet before realizing my mistake. 2nd time we dropped it, we got down to 300 feet. Went to test and heard some abnormal noises. Went to buy the casing roller and then pulled everything BACK up. Reset all my ties and found the hose was cut/damaged. I reached out directly to hose solutions. Within an hour I had everything I needed to cut out the damaged section and splice the hose together. Installed everything once again and got stuck at the 270 foot mark. Tried and tried. Finally I turned the pump on to make the hose fill with water, this did the trick and I was able to glide the rest of the way down to my 330 feet mark. After a year of not having a consistent water supply, I can now say with the help of everyone at my local dealer and Hose solutions. I am set and ready to go. Cant forgot the help of my girlfriend as well. I would definitely recommend this product.

David P.

The boreline hose from this place worked great for my residential 460' well. The other options out there didn't seem great and I needed a good solution where poly pipe was pushing the limits of my pressure rating. I feel comfortable that the hose and fittings will hold up for my lifetime on our forever property. I'm more worried about the pump failing before the hose ever does.

Great customer service, support, and sales staff. They walked me through everything I didn't already know as a first time installer of my own hose and pump. They provided me with everything I needed up front with some basic information provided by me about my well.

Fittings and pipe were easily self installed and were strong enough to drop in the 1 inch hose, wire, and pump, by hand with a simple pulley system. We went with the pitless adapter installation.

You will spend more money than going with poly pipe, but it's worth every penny. Very satisfied customer. Thank you Hose Solutions.

Vincent A.

We recently installed a submersible pump using the boreline system and were very pleased with the product and the support we received from the company. The hose is flexible and was wound around a cardboard core and shipped via ups. We were able to install the pump at 200’ in about 3 hours with no prior experience with the system. The best part of the system is that we can pull our own pump ourselves rather than being reliant on an emergency service call. We ended up saving $2000-$3000 installing the pump ourselves and I would highly recommend the system to the DIY. With this system you no longer need a crane to place or remove the pump. The cost per foot was comparable to what the drillers quoted for sch80 pvc with SS couplers.

michael O.

We installed a 75hp submersible in our 165ft well on 6 inch Boreline and It was easier than riding a bicycle.

It took four very well trains guys about 6 hours to remove the existing vertical turbine pump with steel drop pipe and they look tired by the end of it.

We started at about 9:30am and not a single one of us had ever installed a flexible drop pipe submersible with the exception of a circuit rider onsite from OAWU. We had the whole thing in the well in two hours. The only reason we were sweeting was because on the weather.

Once we got power hooked up we filled the drop pipe with a hose and fire it up. keep in mind we did not have the top plate connected to any discharge piping and it is just sitting on the top of the well casing. This product worked so well that all you could here was the water flowing out the top and the whole thing didn't move a millimeter. A free standing submersible with 130amps on start-up didn't twist even a fraction of an inch.

If I could give Hose Solutions six stars I would

Hands down best product on the market and truly outstanding customer support.

Thank you and can't wait for the next install

Greg R.

Great product, great service, they showed me around their shop and I watched them measure and cut my boreline while talking about install and receiving helpful tips. They make a great product for diy.

Bobby C.

Carlos G.